EVERGLUE AluPoxy epoxy resin modelling clay 56g

Item number: 650071

  |  GSIN: 4251577103397

5,90 €
10,54 € per 100 g

including 16% VAT. , plus shipping (Warenpost)

available now

Shipping time: 1 - 3 workdays


GHS Ausrufezeichen

Hazard statements

  • H315 Causes skin irritation.
  • H317 May cause an allergic skin reaction.
  • H319 Causes serious eye irritation.
  • H412 Harmful to aquatic life with long lasting effects.

Precautionary statements

  • P101 If medical advice is needed, have product container or label at hand.
  • P102 Keep out of reach of children.
  • P280 Wear protective gloves/eye protection/face protection.
  • P305+P338+P351 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P313+P333 If skin irritation or rash occurs: Get medical advice/attention.
  • P313+P337 If eye irritation persists: Get medical advice/attention.
  • P501 Dispose of contents/container in accordance with local/national regulation.

Special labelling

  • EUH205 Contains epoxy constituents. May produce an allergic reaction.

Human health dangers

People who are allergic to epoxide should avoid the use of the product.

Precautions for safe handling

No special measures necessary if used correctly. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Use barrier skin cream. Contaminated work clothing should not be allowed out of the workplace. Take off contaminated clothing and wash before reuse.

Conditions for safe storage

Keep only in original container. Do not store together with oxidizing agents. Keep container tightly closed. Keep container in a well-ventilated place. Keep in a cool place.

Category: Chemical-technical products


Knetkleber mit Aluminiumfüllung

Das EVERGLUE AluPoxy ist eine mit Aluminium gefüllte Epoxidharz-Knetmasse und entsprechend einfach in der Anwendung. Nach der Aushärtung besitzt das Material eine extrem hohe Härte von 87 Shore D (Beton hat im Vergleich 60 Shore D). Anwendungsgebiete von EVERGLUE AluPoxy sind das Ausbessern von Fehlbohrungen, Löchern in Rohren und Lunkern sowie sämtlichen Rissen in Metall, Holz und Kunststoff. Eine mechanische Bearbeitung ist nach kurzer Zeit möglich. Ausgebesserte Teile können geschliffen, gefräst, gebohrt und überlackiert werden.


  • formbar wie Kitt
  • hart wie Metall
  • für sofortige Reparaturen

Contents:56,00 g
Base:Epoxy resin, filled with aluminum
Working temperature:+10 °C to +30 °C
Shelf life:12 months
Shrinkage:~ 0.05 %
Temperature resistance:-50 °C to +180 °C (short term up to +300 °C)
Hardness:87 Shore D
Gap filling capacity:15 mm
Final strength:24 h
Pot life:~ 3-4 min
Tensile shear strength:4.5 MPa (N/mm², DIN 53283)
Curing temperature:+6 °C to +30 °C
Thermal conductivity:0.65 W/m-K
Dielectric strength:3 kV/mm

Average product review

Share your experience with other customers:

Material safety data sheet (MSDS)

Material safety data sheet (MSDS)

Other customers have also bought the following items

We pay attention to quality