YUKI MODEL super glue low viscosity highly flexible 50g

Item number: 650033

  |  GSIN: 4260387431309

5,90 €
11,80 € per 100 g

including 16% VAT. , plus shipping (Warenpost)


available now

Shipping time: 1 - 3 workdays

Warning

GHS Ausrufezeichen

Hazard statements

  • H315 Causes skin irritation.
  • H319 Causes serious eye irritation.
  • H335 May cause respiratory irritation.

Precautionary statements

  • P101 Keep out of reach of children.
  • P102 Keep out of reach of children.
  • P261 Avoid breathing vapours.
  • P271 Use only outdoors or in a well-ventilated area.
  • P280 Wear protective gloves/eye protection/face protection.
  • P305+P338+P351 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P312 Call a POISON CENTER/doctor if you feel unwell.
  • P313+P337 If eye irritation persists: Get medical advice/attention.
  • P405 Store locked up.
  • P501 Dispose of contents/container in accordance with local/national regulation.

Special labelling

  • EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

Human health dangers

People who are allergic to cyanacrylates should avoid the use of the product.

Precautions for safe handling

Use only in well-ventilated areas. Avoid spilling or spraying in enclosed areas. Highly volatile, flammable components are liberated in processing. Keep away from all sources of ignition - Refrain from smoking. Do not eat, drink or smoke when using this product. After worktime and before work breaks the affected skin areas must be thoroughly cleaned. Use barrier skin cream. Contaminated work clothing should not be allowed out of the workplace. Take off contaminated clothing and wash before reuse.

Conditions for safe storage

Only use containers that are approved specifically for the substance/product. Provide solvent-resistant and impermeable floor. Do not store together with oxidizing agents. Protect from heat/overheating. Keep container in a well-ventilated place. Keep container tightly closed.

Category: Chemical-technical products


Piece(s)

Sekundenkleber für Gummi und EPDM

Dieser niedrigviskose Sekundenkleber ist hochflexibel, das heißt er bleibt nach dem Aushärten elastisch und bis 180° biegbar. Er eignet sich insbesondere für das Verkleben von O-Ringen, Schläuchen und anderen Gummiteilen, die dauernden Bewegungen ausgesetzt sind.

Produktmerkmale

  • bleibt elastisch
  • transparent

Anwendungsbereiche

  • Gummi
  • EPDM

Haltbarkeit

Bei idealer Lagerung (dunkel und trocken) zwischen +5 °C bis +8 °C beträgt die Haltbarkeit mindestens 12 Monate.


Contents:50,00 g
Base:ethyl-2-cyanoacrylate
Colour:transparent
Viscosity:~ 90-120 mPa·s at +25 °C (Brookfield)
Density:~ 1.05-1.10 g/ml
Flash point:+85 °C
Shelf life:12 months
Temperature resistance:-60 °C to +80 °C
Gap filling capacity:0.05 mm
Final strength:24 h
Tensile shear strength:20 MPa (N/mm², DIN 53283)

Average product review

Write your first review and help others with their purchase decision:

Material safety data sheet (MSDS)

Material safety data sheet (MSDS)

Recommended accessories for this item

We pay attention to quality

Other customers have also bought the following items

We pay attention to quality